NEC SL2100 - Page 958

For this fea-
ture...
Dial this Service Code...
1
When you ... Also see
Function
Key...
Note
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker
key first).
Name Storing 700 + enter name + Hold Program extension names. 55
Night Service 618 Use Night Mode Switching for other
group.
-
718 + 1
718 + 2
718 + 3
718 + 4
718 + 5
718 + 6
718 + 7
718 + 8
Activate Day 1 Mode.
Activate Night 1 Mode.
Activate Midnight 1 Mode.
Activate Rest 1 Mode.
Activate Day 2 Mode.
Activate Night 2 Mode.
Activate Midnight 2 Mode.
Activate Rest 2 Mode.
09 + 1
09 + 2
09 + 3
09 + 4
09 + 5
09 + 6
09 + 7
09 + 8
Off-Hook Signaling
*
(Off-Hook) or 709 Send off-hook signal tones to a busy
extension.
33
One-Touch Dialing 755 + One-Touch key + code Program a One-Touch Key or Per-
sonal Speed Dial.
-
Paging, Combined
*
1 + Zone (1 ~ 8)
*
1 + Zone (0)
Make a combined zone page.
Make a combined All Call page.
19 + zone
20
Paging, External 703 + zone (1 ~ 3)
703 + zone (0)
Make an external zone page.
Make an external All Call page.
19 + zone
20
Paging, Internal 701 + zone (01 ~ 50)
701 + zone (0 or 00)
Make an Internal Zone Page.
Make an internal All Call Page.
21 + zone
or
22
Park #6 + orbit (01 ~ 50) Park a call in a system Park orbit
(01 ~ 50).
*
04 + orbit
*
6 + orbit (01 ~ 50) Pick up a call parked in a system
Park orbit (01 ~ 50).
*
04 + orbit
757 Park a call or pick up a parked call
at an extension.
-
Programmable
Function Keys
751 + key + code Change the function of a program-
mable key using 751 service code.
-
752 + key + code Change the function of a program-
mable key using 752 service codes.
-
Save Number Di-
aled
715 Save a number (from SLT) or dial a
saved number.
30
785 Clear the number saved by Save
Number Redial number.
-
Selectable Ring
Tones
711 + 1 (ICM) or 2 (Trk) + tone (1 ~ 8) Listen to the incoming ring choices. -
720 + 1 (ICM) + 2 (Trk) + tone (1 ~ 8) Change your extension incoming
ring tones.
-
System Program-
ming Password
Protection
#
*
#
*
Enter system programming mode. -
Station Message
Detail Recording
621 Print the SMDR Extension Accumu-
lated printout.
-
622 Print the SMDR Group Accumulated
printout.
-
623 Print the SMDR Account Code Ac-
cumulated printout.
-
Tandem Trunking
(Unsupervised
Conference)
#8 Set up an Unsupervised Confer-
ence.
-
SL2100 ISSUE 1.0
2-12
Codes Tables