NEC SL2100 - Program 16-01-02; Program 16-01-04; Program 16-01-09

SL2100 GETTING STARTED GUIDE
65
2.13.2 Program 16-01-02
Select how calls ring around the department group.
2.13.2.1 Default Setting
Calls ring in priority order within the department group.
No.
Operation
Display Shows;
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2
Dial 16 01 02. For each group, select the ring mode. You can overwrite
the current entry (0: Priority Order/1: Circular Order) and press Hold
key to confirm the entry and step to the next option.
3
When you are done, press Mute key several times to return to
Programming Mode.
4
Press Speaker key to save changes and exit if you are finished.
2.13.3 Program 16-01-04
Select how many times the calls try each member of the department group.
2.13.3.1 Default Setting
Calls try each telephone once.
No.
Operation
Display Shows;
1 Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2 Dial
16 01 04.
For each group, select the hunting mode. You can
overwrite the current entry (0: Calls try each telephone once/1: Calls
continue trying the telephones) and press Hold key to confirm the
entry and step to the next option.
3
When you are done, press Mute key several times to return to
Programming Mode.
4
Press Speaker key to save changes and exit if you are finished.
2.13.4 Program 16-01-09
Select how long calls ring at each member of the department group. You can use this option to turn off the step
on operation by setting the time to 0 seconds.
2.13.4.1 Default Setting
Calls ring each member for 15 seconds.
No.
Operation
Display Shows;
1
Log into Programming Mode.
If you have already logged into Programming Mode, skip this
operation.
2 Dial 16 01 09. For each group, select the ring duration (0-64800
seconds). You can overwrite the current entry. (0 second will stop the
call stepping on.) and press Hold key to confirm the entry and step to
the next option.
3 When you are dopne, press Mute key several times to return to
Programming Mode.
4 Press
Speaker
key to save changes and exit if you are finished.
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
16-01-02 TEL Group1
Pilot Call 0: Priority
← - + →
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
16-01-04 TEL Group1
Hunting Mode 0: Last
← - + →
_________________________
______Program Mode_______
_Base_Service_OP1__OP2__
16-01-09 TEL Group1
DepGr Call N/A15 Sec|1
← - + →