Item
No.
Item Input Data Description Default Related
Program
12 Off-Hook Ringing 0 = Muted Off-Hook
Ringing
1 = No Off-Hook Ring-
ing
2 = Not Used
3 = Beep in Speaker
(SP)
4 = Beep in Handset
(HS)
5 = Speaker and Hand-
set Beep
Use this option to set the telephone
Off-hook signaling. Off-hook signal-
ing occurs when a telephone user
receives a second call while busy on
a handset call. To enable/disable
Off-hook signaling for an extension
Class of Service, use Program
20-13-06.
5
13 Redial List Mode 0 = ICM/Trunk (Exten-
sion/Trunk Mode)
1 = Trunk Mode
Select whether the Redial List fea-
ture should store internal and exter-
nal numbers (0), or only external
numbers (1).
0
15 Storage of Call-
er-ID for an-
swered call
0 = Disable (Off)
1 = Enable (On)
1
16 Handsfree Oper-
ation
0 = Disable (Off)
1 = Enable (On)
Enable or disable an extension abili-
ty to use the speakerphone on out-
side calls. When disabled, users can
hear the conversation, but cannot
respond handsfree.
1
18 Power-Saving
Mode
0 = Normal mode
1 = Power-Saving
Mode (Eco-Mode)
1
21 Virtual Extension
Access Mode
(when idle Virtual
Extension key
pressed)
0 = DSS
1 = Outgoing (OTG)
2 = Ignore
Determine whether a Virtual Exten-
sion (VE) should function as a DSS
key or a Virtual Extension. When
DSS (0) is selected, the key func-
tions as a DSS key to the extension
and for incoming calls to that exten-
sion. When Outgoing (1) is selected,
the key functions as a virtual exten-
sion and can be used for incoming
and outgoing calls. When Ignore (2)
is selected, the key functions can re-
ceive incoming calls only.
2
22 Multiple Incom-
ing From Inter-
com and Trunk
0 = Disable
1 = Enable
If enabled, this affects how a Hotline
key lights, based on the setting in
Program 22-01-01. If 22-01-01 is set
to 1 for trunk priority, the Hotline key
lights solid when a trunk call rings
in. If 22-01-01 is set to 0 for inter-
com priority, the Hotline key does
not light for incoming trunk calls, but
lights solid for intercom calls. If
15-02-22 is disabled, Hotline keys
light solid for any incoming calls re-
gardless of the setting in Program
22-01-01.
1 22-01-01
23 Speed Dial Pre-
view Mode
0 = Preview
1 = Outgoing Immedi-
ately
This option defines how a speed dial
key functions when pressed. If set to
Preview (0), the speed dial number
can be previewed before dialing. If
set to Outgoing Immediate (1), the
number is dialed immediately.
0
SL2100 ISSUE 1.0
4-12 Program 15 : Extension, Basic Setup
Program
15
To Next Page
Loading...
