NEC SL2100 - Page 89

Func-
tion
Number
Function Additional Da-
ta
LED Indication Note
*
17 ACD Work wrap
up time
On : While wrap up time
Slow Blink : While setup wrap up time
*
19 ACD Queue Sta-
tus Display
None
*
32 Warning Mes-
sage
On (Red) : Play warning message
Off : Stop warning message
*
33 Sensor Mode On (Red) : Security Sensor On
Off : Security Sensor Off
(125msec:on / 125msec:off / 125msec:on /
625msec:off) : Security Sensor Delay Timer
(PRG20-50-01) is starting.
*
35 System Call His-
tory
On (Green) : Using
On (Red) : Other using
Off : Not using
LED Pattern 0:[OFF]
LED Pattern 1:[FL: On(500ms)/Off(500ms)]
On
Off
On
Off
LED Pattern 2:[WK: On(250ms)/Off(250ms)]
On
Off
LED Pattern 3:[RW: On(125ms)/Off(125ms)]
On
Off
LED Pattern 4:[IR: On(125ms)/Off(125ms)/ On(125ms)/Off(625ms)]
LED Pattern 5:[IL On(875ms)/Off(125ms)]
LED Pattern 6:[IW On(625ms)/Off(125ms)/On(125ms)/Off(125ms)]
LED Pattern 7:[ON]
On
Off
On
Off
On
Off
On
Off
2W Digital/IP Multiline Terminal
LED Indication Reference :
ON = LED pattern 7. (2W Digital/IP Multiline Terminal)
OFF = LED pattern 0. (2W Digital/IP Multiline Terminal)
Rapid Blink = LED pattern 3. (2W Digital/IP Multiline Terminal)
Slow Blink (General Function Level) = LED pattern 5 (2W Digital/IP Multiline Terminal).
Slow Blink (Appearance Function Level) = LED pattern 1.
Fast Blink = LED pattern 3 (2W Digital/IP Multiline Terminal).
ISSUE 1.0
SL2100
ACD Installation Manual 4-23
Program
15