NEC SL2100 - Page 148

2.2.5 SIP Extension CODEC Information
Program
Number
Program Name Description/
Comments
Assigned Data 1 2 3
84-19-01 SIP Extension CODEC Informa-
tion Basic Setup –Number of G.
711 Audio Frames
Define the G.711 audio
Frame Size
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 2
X
84-19-02 SIP Extension CODEC Informa-
tion Basic Setup – G.711 Voice
Activity Detection Mode
Enable/Disable Voice Ac-
tivity Detection for G.711.
0 = Disable
1 = Enable
Default is 0
X
84-19-03 SIP Extension CODEC Informa-
tion Basic Setup – G.711 Type
Define the G.711 Type –
μ-law is recommended in
USA.
0 = A-law
1 = μ-law
Default is 0
X
84-19-04 SIP Extension CODEC Informa-
tion Basic Setup – G.711 Jitter
Buffer (min)
Define G.711 Jitter Buffer
minimum accepted val-
ue.
0~300ms
Default is 20
X
84-19-05 SIP Extension CODEC Informa-
tion Basic Setup – G.711 Jitter
Buffer (Average)
Define G.711 Jitter Buffer
setting.
0~300ms
Default is 40
X
84-19-06 SIP Extension CODEC Informa-
tion Basic Setup – G.711 Jitter
Buffer (max)
Define G.711 Jitter Buffer
maximum accepted val-
ue.
0~300ms
Default is 80
X
84-19-07 SIP Extension CODEC Informa-
tion Basic Setup – Number of
G.729 Audio Frames
Define the G.729 audio
Frame Size.
1~6
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
Default is 2
X
84-19-08 SIP Extension CODEC Informa-
tion Basic Setup – G.729 Voice
Activity Detection Mode
Enable/Disable Voice Ac-
tivity Detection for G.729.
0 = Disable
1 = Enable
Default is 0
X
84-19-09 SIP Extension CODEC Informa-
tion Basic Setup – G.729 Jitter
Buffer (min)
Define G.711 Jitter Buffer
minimum accepted val-
ue.
0~300ms
Default is 20
X
84-19-10 SIP Extension CODEC Informa-
tion Basic Setup – G.729 Jitter
Buffer (average)
Define G.729 Jitter Buffer
setting.
0~300ms
Default is 40
X
84-19-11 SIP Extension CODEC Informa-
tion Basic Setup – G.729 Jitter
Buffer (max)
Define G.729 Jitter Buffer
maximum accepted val-
ue.
0~300ms
Default is 80
X
84-19-17 SIP Extension CODEC Informa-
tion Basic Setup – Jitter Buffer
Mode
Define the Jitter Buffer
mode – supported Static
or Immediate.
1 = Static
2 = Not used
3 = Adaptive Immediately
Default is 3
X
84-19-18 SIP Extension CODEC Informa-
tion Basic Setup – VAD Thresh-
old
Define the VAD Thresh-
old.
0~30
Default is 20
X
84-19-28 SIP Extension CODEC Informa-
tion Basic Setup – Audio Capa-
bility Priority
Define Audio capability
priority.
0 = G.711_PT
1 = Not Used
2 = G.729_PT
3 = G.722
4 = G.726
5 = Not Used
Default is 0
X
SL2100 ISSUE 1.0
10-4
IP Single Line Telephone