NEC SL2100 - Page 151

Program
Number
Program Name Description/
Comments
Assigned Data 1 2 3
15-05-02 IP Telephone Terminal Basic
Data Setup – Terminal MAC
Address
MAC Address of regis-
tered MLT SIP phone is
stored and/or can input
the MAC address of an
MLT SIP phone so when
it comes online it is provi-
ded with the extension in
which the MAC address
matches.
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF
Default is
00-00-00-00-00-00
X
15-05-07 IP Telephone Terminal Basic
Data Setup – Using IP Address
Informational Only regis-
tered IP Phones
0.0.0.0~255.255.255.255
Default is 0.0.0.0
X
15-05-16 IP Telephone Terminal Basic
Data Setup – Password
Assign the authentication
password for SIP single
line telephones.
Up to 24 characters
Default not assigned
X
15-05-18 IP Telephone Terminal Basic
Data Setup – IP Duplication Al-
lowed Group
If an adapter has one IP
address coming into it
but multiple extensions
off of it, assign all exten-
sions to a group so the
CPU knows that the one
IP address is assigned to
multiple extensions.
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5
6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
Default is 0
X
15-05-40 IP Telephone Terminal Basic
Data Setup – Calling Name Dis-
play
0 = Both Name and Number
1 = Name only
2 = Number only
3 = None
Default = 0
X
15-05-41 IP Telephone Terminal Basic
Data Setup – Time Zone
0 ~ 24
(-12 ~ +12 hour)
Default = 12
X
15-05-43 IP Telephone Terminal Basic
Data Setup – Video Mode
0 = Disable
1 = Enable
Default = 0
X
15-05-44 IP Telephone Terminal Basic
Data Setup – Using STD-SIP
Display for CPN
0 = Disable
1 = Enable
Default = 0
X
15-05-49 IP Telephone Basic Setup - Re-
ceiving SIP INFO
Determines whether SIP
INFO messages are re-
ceived by the system.
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is
not available
Default = 2
2.2.8 NAT Mode for Standard SIP terminal
Program
Number
Program Name Description/Comments Assigned Data 1 2 3
10-12-03 CPU Network Setup –
Default Gateway
Assign the IP Address for
the Router.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
X
10-12-07 CPU Network Setup -
NAPT Router IP Ad-
dress (Default Gate-
way [WAN])
Define the IP Address of the
WAN side of the router.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
X
ISSUE 1.0 SL2100
Networking Manual 10-7