NEC SL2100 - Page 79

Program/Item
No.
Description/
Selection
Assigned Data Comments
84-13-33 SIP Trunk CODEC Information
Basic Setup – Number of G.
722 Audio Frames
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 3
Select SIP Profile 1-6.
84-13-35 SIP Trunk CODEC Information
Basic Setup – G.722 Jitter Buf-
fer (min)
0~300ms
Default is 30
Select SIP Profile 1-6.
84-13-36 G.722 Jitter Buffer (average) 0~300ms
Default is 60
Select SIP Profile 1-6.
84-13-37 G.722 Jitter Buffer (max) 0~300ms
Default is 120
Select SIP Profile 1-6.
84-13-38 Number of G.726 Audio
Frames
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 3
Select SIP Profile 1-6.
84-13-39 G.726 VAD Mode 0 = Disable
1 = Enable
Default is 0
Select SIP Profile 1-6.
84-13-40 G.726 Jitter Buffer (min) 0~300ms
Default is 30
Select SIP Profile 1-6.
84-13-41 G.726 Jitter Buffer (average) 0~300ms
Default is 60
Select SIP Profile 1-6.
84-13-42 G.726 Jitter Buffer (max) 0~300ms
Default is 120
Select SIP Profile 1-6.
84-13-49 RTP Filter 0 = Disable
1 = IP
2 = IP + SSRC
Default is 1
Select SIP Profile 1-6.
Set the FAX Relay Mode.
84-33-01 FAX Relay Mode 0 = Disable
1 = Enable
2 = Each Port Mode
Default is 0
Select SIP Profile 1-6.
ISSUE 1.0 SL2100
Networking Manual 7-11