NEC SL2100 - Page 83

Program/Item
No.
Description/
Selection
Assigned Data Comments
10-29-13 SIP Server Information Setup –
Proxy Host Name
48 characters maximum
Default not assigned
Select SIP Profile 1-6.
Define the Proxy Host name
(NEC SL2100 proxy name).
6.9 SIP Registrar Setup
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-29-05 SIP Server Information Setup –
Registrar Mode
0 = None
1 = Manual
Default is 0
Select SIP Profile 1-6.
Define the Registrar Mode. This
should always be set to manual
when using SIP trunking.
10-29-06 SIP Server Information Setup –
Registrar IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
Select SIP Profile 1-6.
Define the Registrar IP Address. The
carrier may provide an IP address. In
most cases, a domain name will be
used so this entry will be left at the
default.
10-29-07 SIP Server Information Setup –
Registrar Port Number
0 ~ 65535
Default is 5060
Select SIP Profile 1-6.
Define the Registrar Port Numbers.
10-29-11 SIP Server Information Setup –
Registrar Domain Name
128 characters maximum
Default not assigned
Select SIP Profile 1-6.
Define the Registrar Domain Name
(normally provided by the SIP carri-
er).
Example:
SIPconnect-sca@L0.cbeyond.net
10-29-15 SIP Server Information Setup –
Registration Expiry (Expire)
Time
120 ~ 65535 seconds
Default is 3600
Select SIP Profile 1-6.
Define the Registration Expire time –
the time allowed to register with the
SIP carrier.
This should stay at the default entry.
10-29-20 Authentication Trial 0 ~ 9
0 = No Authentication
Default is 1 (1 Authentication At-
tempt)
Select SIP Profile 1-6.
10-29-21 NAT Router 0 = Disabled
1 = Enabled
Default is 0
Select SIP Profile 1-6.
ISSUE 1.0 SL2100
Networking Manual 7-15