ISSUE 4.0 SL2100
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS 106
3. Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to Figure 2-88 Hook-Switch Hanger.
Hook-switch hanger Hook-switch hanger
Figure 2-96 Hook-Switch Hanger
4. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12″).
Figure 2-97 Wall-Mount Screw Guide
5. Mount the telephone on the wall.
Wall side
Figure 2-98 Mounting the IP Multiline Telephone
• REMOVE A TRANSPARENT PROTECTION SHEET from the telephone,
when installing the telephone.
To Next Page
Loading...
