NEC SL2100 - 5.3.2 Wall-Mounting the DSS Console

ISSUE 4.0 SL2100
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS 109
5.3.2 Wall-Mounting the DSS Console
1. Lift the leg and lead the cable through the applicable grooves. Refer to Figure 2-103 Cabling for
Wall-Mount. Lower leg to stowed position.
Figure 2-103 Cabling for Wall-Mount
2. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12″).
7 - 9.5 mm
(0.28″ - 0.37″)
83.5 mm
(3.287″)
Minimum 10 mm (0.39″)
3 - 4 mm
(0.12″ - 0.16″)
1 - 3 mm
(0.04″ - 0.12″)
Figure 2-104 Wall-Mount Screw Guide
3. Mount the DSS Console to the wall.
Wall side
Figure 2-105 Mounting the DSS
Leg
< Bottom view>
Wall-mounting
holes