NEC SL2100 - 5.11 Installing the IP Multiline Telephone (ITK-8 LCX-1); 5.11.1 Location of Controls

ISSUE 4.0 SL2100
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS 122
5.11 Installing the IP Multiline Telephone (ITK-8LCX-1)
5.11.1 Location of Controls
No
Name
Functions
(1)
Handset
Used for sending/receiving voice.
(2)
Back Key
To return to previous window.
(3)
Speaker
Originating a call with handsfree.
(4)
Dial Keypad
Dial the called party number or feature access code.
(5)
Hold key
To place a call on hold.
(6)
Transfer key
Allows the terminal user to transfer established calls to another terminal,
without attendant assistance.
(7)
Speaker Key (with light)
To control the built-in speaker which can be used for handsfree dialing or
monitoring.
(8)
Cursor Key
Enter key
To determine the selected item in the menu. Also, this key is used as
cursor-movement key on the local menu of the terminal.
This terminal has Shortcut Menu for frequently-used features. Use this key
to display the Shortcut Menu (Note: For only classic mode)
Volume (UP/DOWN) key
Used to adjust speaker/receiver volume, and ringer volume.
Right key (Directory)
Press this key to open the Directory menu.(Note: For only classic mode)
Left key (Redial)
Press this key to activate Redial feature. Press Redial and scroll back
through numbers that have been dialed. When the desired number is
display, press or to activate dialing. (Note: For only Classic Mode)