NEC SL2100 - 6.1.5 Mounting the Base to a Standard Wall Plate

ISSUE 4.0 SL2100
INSTALLING WIRELESS DECT TELEPHONES 131
Route the power cord where it can not create a trip hazard, or where it could
become chafed and create a fire or other electrical hazards.
Figure 2-126 Polarized Plug
6.1.5 Mounting the Base to a Standard Wall Plate
The base unit can be mounted on a standard wall plate. To attach the wall mount stand to the base
unit:
1. Slide the wall mount stand in the notches at the top of the base unit.
Rotate the wall mount stand down and snap it into place.
Figure 2-127 Attaching the Wall Mount Stand to the Base Unit
2. Plug the AC adapter into the base unit.