ISSUE 4.0 SL2100
INSTALLING WIRELESS DECT TELEPHONES 136
6.1.8 Attaching and Removing the Belt Clip
A belt clip can be used to attach the handset to a belt or pocket for convenient portability.
1. Slide the clip into the tab slots. Press firmly until it snaps into place. The belt clip fits snugly onto
the handset.
Figure 2-137 Attaching the Belt Clip to the Handset
2. To remove the clip, press the retaining clip in toward the belt clip blade and slide the clip up at the
same time.
Figure 2-138 Removing the Belt Clip
6.1.9 Installing the Handset Battery Pack
Before installing batteries, refer to D
term
® Cordless DECT Owner’s Manual Specifications and Battery
Safety. It is important to follow safety regulations when handling batteries.
To Next Page
Loading...
