NEC SL2100 - Page 197

ISSUE 4.0 SL2100
LITHIUM BATTERY REPLACEMENT 195
4. Remove the old Lithium battery and insert the new one into the socket.
The polarity “+” symbol must be on top as illustrated in following figure.
Lithium battery
Socket
Figure 4-4 Removing the Lithium Battery
Lithium battery
Socket
Figure 4-5 Inserting the Lithium Battery
5. Insert the CPU board in the guide rail of chassis and push it securely into position, and tighten
the two screws.
Screws
Figure 4-6 Installing the CPU Board
CPU board
Guide rail