ISSUE 4.0 SL2100
MAIN SOFTWARE UPGRADING 198
1. Connect the PC to the Ethernet port on the CPU-C1 using a LAN cable.
Figure 4-8 Preparation of Web Programming
Before you start the Web Programming, set the following settings;
• Set your PC’s IP address for the system.
• Enable JavaScript in your browser by accessing your browser settings.
2.4.1.2 Accessing Firmware Update using Web Programming
1. To log in, launch any support browser and enter the IP address of the SL2100 LAN port.
IP Address is 192.168.0.10 (by default).
2. WebPro Login Screen is displayed, enter the User Name and Password (using PRG90-02).
Click the Login button.
Figure 4-9 WebPro Login Screen
To Next Page
Loading...
