ISSUE 4.0 SL2100
MAIN SOFTWARE UPGRADING 202
8. WebPro starts uploading and the following message is displayed on the screen.
Wait until the following message appears on the window.
Figure 4-15 Software Upload completed Screen
DO NOT click the Home or Back buttons on the browser, or close the
WebPro browser, during uploading the Firmware, otherwise Upload stops.
If you choose the Schedule Reset, the following message appears in Home screen until specified time.
If you want to Cancel the update, click the Cancel Update button to cancel the update.
Figure 4-16 Cancel Update Screen
Software Uploading is in Progress, Do Not interact with browser window
until the firmware update is completed and system has restarted. During a
system restart, the main software is written to CPU flash memory. Do Not
unplug the power cord while flash memory is in write state as this will
damage the CPU. The CPU flash memory write will take about 15 minutes.
To Next Page
Loading...
