NEC SL2100 - SECTION 6 CURSOR KEY OPERATION; 6.1 Menu Structure When PRG 15-02-60 is Set to Standard Mode

ISSUE 4.0 SL2100
INSTALLING THE MAIN & EXPANSION CHASSIS 45
2. Install three screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098″) to 3.5 mm (0.138″).
Figure 2-10 Screw Positions
• The screw diameter is 4 mm (0.158″) to 4.5 mm (0.177″).
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the Chassis.
The other screw is installed after slide the chassis into the position.
3. Align the three holes on the back of the Chassis with the three screws installed in the wall.
Screw head
Hook
Screw head
Figure 2-11 Mounting the Chassis