NEC SL2100 - 6.2 Menu Structure When PRG 15-02-60 is set to Advanced Mode 1

ISSUE 4.0 SL2100
INSTALLING THE MAIN & EXPANSION CHASSIS 46
4. Tighten the other screw at the lower left after slide the chassis into the wall.
Fasten screw
Figure 2-12 Fixing the Chassis
1.5.3 Wall Mounting the Chassis and the Backup Battery (IP4WW-Battery Box)
For the details of IP4WW Battery Box installation, refer to INSTALLING THE EXTERNAL BACKUP
BATTERY.
Vertical Arrangement of Chassis and Battery Boxes
For Wall Mounting the Chassis and the IP4WW-Battery Box, refer to Figure 2-13 Vertical Arrangement
of Chassis and Battery Boxes.
Due to the limit of extension cable length to connect Main Chassis and Expansion Chassis, the install
location of Main Chassis and each Expansion Chassis must be considered as Figure 2-13 Vertical
Arrangement of Chassis and Battery Boxes.