NEC SL2100 - Page 49

ISSUE 4.0 SL2100
INSTALLING THE MAIN & EXPANSION CHASSIS 47
Minimum
300 mm
(11.81″)
IP4WW-Battery Box
Expansion Chassis 1
Expansion Chassis 2
Main Chassis
Minimum
200 mm
(7.874″)
Minimum
200 mm
(7.874″)
Figure 2-13 Vertical Arrangement of Chassis and Battery Boxes
Horizontal Arrangement of Chassis and Battery Boxes
For Wall Mounting the Chassis and Floor Mounting the IP4WW-Battery Box, refer to
Figure 2-14 Horizontal Arrangement of Chassis and Battery Boxes.
Due to the limit of extension cable length to connect Main Chassis and Expansion Chassis, the install
location of Main Chassis and each Expansion Chassis must be considered as above or as
Figure 2-14 Horizontal Arrangement of Chassis and Battery Boxes.