NEC SL2100 - 1.7.2 Installation of the EXIFB-C1

ISSUE 4.0 SL2100
INSTALLING THE MAIN & EXPANSION CHASSIS 49
1.7.2 Installation of the EXIFB-C1
1.7.2.1 Unpacking
Unpack the EXIFB-C1 and check it against physical damage.
Table 2-5 EXIFB-C1 Packing List
Items
List of Contents
QTY
EXIFB-C1
EXIFB-C1 Board
1
Metal Spacers
4
Screws (with Circular Washer)
4
Springwashers
4
Nuts
4
1.7.2.2 Connectors Location
J1 (EXP1)
J2 (EXP2)
J3
Figure 2-16 Connectors of EXIFB-C1
Table 2-6 Connectors of EXIFB-C1
1.7.2.3 Installing the EXIFB-C1 Board
Not all boards are hot swappable. Do not remove or install from the chassis
when powering up.
Do Not Power on until all installations have been completed.
1. Turn off the system power.
No.
Connectors
Connectable Devices
J1 (EXP1)
Expansion Connector
J2 (EXP) connector on the EXIFE-C1 board of the Expansion Chassis 1
J2 (EXP2)
Expansion Connector
J2 (EXP) connector on the EXIFE-C1 board of the Expansion Chassis 2
J3
CPU Board
J22 connector on the CPU-C1