ISSUE 4.0 SL2100
INSTALLING THE MAIN & EXPANSION CHASSIS 51
4. Mount the EXIFB-C1 daughter board onto the CPU board using four Metal Spacers, four spring
washers, four screws and four nuts.
To install the EXIFB-C1 daughter board:
1. Four Metal spacers, nuts, spring washers and screws are included with the EXIFB-C1
daughter board. Install the metal spacers through the CPU-C1 board using four nuts and
spring washers.
2. Position the EXIFB-C1 J3 connector over the J22 connector on the CPU-C1 board. Press
the CPU-C1 board and EXIFB-C1 daughter board together.
3. Screw the EXIFB-C1 daughter board using four screws. (refer to Figure 2-19 EXIFB-C1
Board Installation)
Be careful not to damage the components on the CPU board and EXIFB
daughter board when installing.
Figure 2-19 EXIFB-C1 Board Installation
To Next Page
Loading...
