Figure 2-34 Connecting the Battery Cables
Incorrect installation of batteries may damage the Fuse Unit or cause
possible fire.
9. Insert Battery Connection Cable into the Cable guides as shown in the next diagram.
10. Install the Battery tray cover aligning the three tabs and tightening the two screws.
Two screws
Three tabs
(with stopper)
Battery tray cover
Battery
Connection Cable
Cable guides
Figure 2-35 Installation of Battery Tray Cover
• Do not pull the Battery connection cable strongly.
• Be careful not to catch the Battery Connection Cable when installing the
Battery tray cover.
Write down the year and month of the next battery replacement in the label on Front cover.
To Next Page
Loading...
