ISSUE 4.0 SL2100
INSTALLING THE OPTIONAL INTERFACE BOARDS 94
4. Install the VOIPDB-C1 board to J2 connector on the CPU board, and tighten the four screws.
Be careful not to damage the components on the CPU board when
installing.
J1
VOIPDB-C1 board
J2
CPU board
Screws
Screws
Figure 2-76 Installing the VOIPDB-C1 Board
When the VOIPDB-C1 and EXIFB-C1 are mounted on the CPU board, refer to the following
installation as Figure 2-77 Installing the VOIPDB-C1 and EXIFB-C1.
Be careful not to damage the components on the CPU board and EXIFB
daughter board when installing.
To Next Page
Loading...
