NEC SL2100 - Page 133

Item
No.
Item Input Data Description Default Related
Program
04 Destination Num-
ber
If Transfer mode is (Re-
fer to 13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0,
*
, #, P, R, @
(Maximum 36 Charac-
ters)
2 = Incoming Ring
Group
0 ~ 50 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits
when using ISDN func-
tionality
3 = Remote Monitor
Dial (Up to 8 digits)
This setting can be changed only
when Program 13-04-03 is set
other than 0. Also if the Pr
ogram
13-04-03 is set to 3 only Exten-
sion number can be changed.
No Setting 13-04-03
05 Incoming Ring
Pattern
[1 or 2] Incoming Ring
Pattern(0 ~ 13)
Incoming Ring Pat-
tern(0 ~ 13)
0 = normal pattern
1 = tone pattern 1
2 = tone pattern 2
3 = tone pattern 3
4 = Pattern 4 (2W Digi-
tal/IP Multiline Termi-
nal)
5 = Scale Pattern 1
(2W Digital/IP Multiline
T
erminal)
6 = Scale Pattern 2
(2W Digital/IP Multiline
Terminal)
7 = Scale Pattern 3
(2W Digital/IP Multiline
Terminal)
8 = Scale Pattern 4
(2W Digital/IP Multiline
Terminal)
9 = Scale Pattern 5
(2W Digital/IP Multiline
Terminal)
10 = Pattern 5 (2W Dig-
ital/IP Multiline Termi-
nal)
11 = Pattern 6 (2W Dig-
ital/IP Multiline Termi-
nal)
12 = Pattern 7 (2W Dig-
ital/IP Multiline Termi-
nal)
13 = Pattern 8 (2W Dig-
ital/IP Multiline Termi-
nal)
When set 1 or 2 at PRG13-04-03,
this program is used to assign a ring
pattern for the caller ID routed call.
0 13-04-03
07 VRS Message
Number
0 ~ 100 Vacant 0
11 Mailbox Number 0 ~ 128
900 ~ 931
This setting only works when
Program 13-04-01 Speed Dial
and Incoming T
runk Call match.
*IntraMail : Station Mailbox (1
~ 128) Group Mailbox (900 ~
931)
0 40-02
ISSUE 2.0 SL2100
Programming Manual 2-109
Program
13