NEC SL2100 - Program 14: Trunk, Basic Setup; Basic Trunk Data Setup

Program 14 : Trunk, Basic Setup
14-01 : Basic Trunk Data Setup
Level:
IN
Description
Use Program 14-01 : Basic Trunk Data Setup
to set the basic options for each trunk port. Refer to
the chart below for a description of each option, its range and default setting.
Input Data
Trunk Port Number 1 ~ 128
Item
No.
Item Input Data Description Default Related
Program
01 Trunk Name Up to 12 characters Set the names for trunks. The trunk
name displays on a multiline termi-
nal for incoming and outgoing calls.
Refer below
02 Transmit Level 1 ~ 57
(- 15.5 dB ~ + 12.5 dB)
Use this option to select the CODEC
gain for the trunk. The option sets
the gain (signal amplification) for the
trunk you are programming.
32 (0 dB)
03 Receive Level 1 ~ 57
(- 15.5 dB ~ + 12.5 dB)
Use this option to select the CODEC
gain for the trunk. The option sets
the gain (signal amplification) for the
trunk you are programming.
32 (0 dB)
04 Transmit Gain
Level for Confer-
ence and Trans-
fer Calls
1 ~ 57
(- 15.5 dB ~ + 12.5 dB)
Use this option to select the CODEC
gain type used by the trunk when it
is part of an Unsupervised Confer-
ence.
32 (0 dB)
05 Receive Gain
Level for Confer-
ence and Trans-
fer Calls
1 ~ 57
(- 15.5 dB ~ + 12.5 dB)
Use this option to select the CODEC
gain type used by the trunk when it
is part of an Unsupervised Confer-
ence.
16 (- 8 dB)
06 SMDR Printout 0 = No (trunk will not be
reported in the SMDR
print out.)
1 = Yes (trunk will be
reported in the SMDR
print out.)
This option can include/exclude
trunks from being reported in the
SMDR printout.
If a trunk is set to No Print Out (set-
ting data of 0) any calls made or re-
ceived on this line will not be repor-
ted in the SMDR printout.
1
07 Outgoing Calls 0 = Deny (No)
1 = Allow (Yes)
Use this option to allow/prevent out-
going calls on the trunk you are pro-
gramming.
1
08 Toll Restriction 0 = Restriction Disa-
bled (Toll restriction will
not be applied to calls
on this trunk.)
1 = Restriction Enabled
(Toll restriction will be
applied to calls on this
trunk.)
Use this option to enable/disabled
Toll Restriction for the trunk. If ena-
bled, the trunk follows Toll Restric-
tion programming (example: Pro-
grams 21-05, 21-06). If disabled, the
trunk is a toll free line.
1 21-04
21-05
21-06
SL2100 ISSUE 2.0
2-114 Program 14 : Trunk, Basic Setup
Program
14