NEC SL2100 - Page 141

Item
No.
Item Input Data Description Default Related
Program
41 Incoming Caller
Name Usage
0 = Use
1 = Ignore
This program will determines that
the caller name information from the
network is valid or not. If the pro-
gram is set to 1, the caller name in-
formation the network provides is ig-
nored.
0
46 Collect Call
Blocking
0 = Disable
1 = Enable
Can block the Collect only when
ISDN line is in use.
0 20-09-09
47 DTMF Receiver
Type
1 ~ 3 = Type 1 ~ Type 3 1
Default
Item01 : Trunk Name
Trunk Port Number Name
1 Line 001
2 Line 002
: :
128 Line 128
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-117
Program
14