Program 15 : Extension, Basic Setup
15-13 : Loop Keys
Level:
IN
Description
Use Program 15-13 : Loop Keys to assign the Loop Key data for each keyset terminal. Loop Keys
can be incoming, outgoing or both ways. Outgoing Loop Keys use the entry in item 1. Incoming Loop
Keys use the entry in item 2. Both Way Loop Keys follow the entries in both item 1 and 2.
Input Data
Extension Number Maximum eight digits
Key Number 01 ~ 32
Item
No.
Item Input Data Default
01 Outgoing Option 0 ~ 50
(0 = Assigns the Loop Key for ARS, 1 ~ 50 = As-
signs the Loop Key to the trunk group specified)
0
02 Incoming Option 0 ~ 50
(0 = Assigns the Loop Key to all trunk groups,
1 ~ 50 = Assigns the Loop key to the trunk group
specified)
0
Conditions
• Please set Loop Key at Program 15-07 before setting Program 15-13.
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-163
Program
15
To Next Page
Loading...
