Program 15 : Extension, Basic Setup
15-20 : LCD Line Key Name Assignment
Level:
IN
Description
Use this Memory Block to assign a name to each LCD Line Key of the IP Multiline Terminal. Up to 13
characters can be assigned.
Input Data
Extension Number Up to eight digits
Key Number 1 ~ 32
Item No. Item Input Data Default
01 Name Up to 13 characters Refer below
Name (Chinese Character) The Chinese character of a maximum of 6
characters
Default
Key No. Name Name (Chinese Character)
LK01 CO 001 All Blank
: : :
LK06 : :
LK07 : :
LK08 CO 008 :
LK09 All Blank :
: : :
LK32 All Blank All Blank
Depend on PRG15-07-01
When Chinese characters is inputted, if character is not inputted, it is an error
. It is not an error when only
character is inputted.
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-169
Program
15
To Next Page
Loading...
