NEC SL2100 - Trunk Incoming Ring Tone of Extension Setup

Program 15 : Extension, Basic Setup
15-28 : Trunk Incoming Ring T
one of Extension Setup
Level:
IN
Description
Use Program 15-28 : Trunk Incoming Ring T
one of Extension Setup to define the ringing tone for
each trunk port of extension.
Input Data
Extension Number Up to eight digits
Trunk port number 1 ~ 128
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Description Default Related
Program
01 Trunk Incoming
Ring Tone
0 ~ 8
0 = Trunk incoming ring
tone (
2W Digital/IP
Multiline Terminal)
1 = High (2W Digital/IP
Multiline Terminal)
2 = Middle (2W
Digital/IP Multiline Ter-
minal)
3 = Low (2W Digital/IP
Multiline Terminal)
4 = Melody1 (2W Digi-
tal/IP Multiline Termi-
nal)
5 = Melody2 (2W Digi-
tal/IP Multiline Termi-
nal)
6 = Melody3 (2W Digi-
tal/IP Multiline Termi-
nal)
7 = Melody4 (2W Digi-
tal/IP Multiline Termi-
nal)
8 = Melody5 (2W Digi-
tal/IP Multiline Termi-
nal)
Assign individual ring tones at ex-
tension for each trunk and each
Night mode.
When 0 (Trunk incoming ring tone)
is selected, it follows the setting of
Program 15-02-02.
When 2 (Incoming external ring
tone) is selected, it follows the set-
ting of Program 22-03.
0 22-03
15-02-02
Conditions
None
ISSUE 2.0 SL2100
Programming Manual 2-173
Program
15