NEC SL2100 - System Options for Caller ID

Program 20 : System Option Setup
20-19 : System Options for Caller ID
Level:
IN
Description
Use Program 20-19 : System Options for Caller ID to define the system options for the Caller ID
feature.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Caller ID Display-
ing Format
0 = First 10 digits (Up-
per)
1 = Last 10 digits (Low-
er)
(if displaying digits are more than 12
digits)
0
02 Caller ID Wait
Timer
0 ~ 30 seconds
When an incoming CO call is re-
ceived, the SL2100 starts the timer.
It will wait the programmed time for
Caller ID information from Telco be-
fore connecting the CO call.
5
03 Caller ID Edit
Mode
0 = Off
1 = On
If Caller ID Edit Mode is disabled
(0), no access code will be added to
the Caller ID. If this option is ena-
bled (1), the access code entered in
PRG 10-02-02 & 10-02-03 will be
added to the beginning of the Caller
ID.
0
04 Wait Facility IE
Timer
0 ~ 64800 seconds This timer is used with ISDN trunks
to determine how long the system
waits for the Caller ID name from
the Telco.
10
05 Caller ID Sender
Queuing Time
(Sender Wait)
0 ~ 64800 seconds 0
07 Long Distance
Code
Up to two digits 1 20-19-08
08 Area Code Up to six digits No Setting 20-19-07
09 Calling party
Name for ISDN
Trunk
Maximum of 12 digits
(0 ~ 9,
*
, #)
When a name is programmed in this
program this will be the name sent
out for all callers that have PRG
15-01-10 enabled.
No Setting
Conditions
None
SL2100 ISSUE 2.0
2-212 Program 20 : System Option Setup
Program
20