NEC SL2100 - 4.3.3 Repeat Dialing (Outside Call Only); 4.3.4 Answer Message Waiting (Terminal Indicator is Flashing Red)

Program 10 : System Configuration Setup
10-02 : Location Setup
Level:
SA
Description
Use Program 10-02 : Location Setup to define the location of the installed system.
Input Data
Item
No.
Item Input Data Description Default
01 Country Code Dial (up to four digits) :
0 ~ 9,
*
, #
Enter the country code. 1
02 International Access
Code
Dial (up to four digits) :
0 ~ 9,
*
, #
Enter the international access code. No Setting
03 Other Area Access
Code
Dial (up to two digits) :
0 ~ 9,
*
, #
Enter the other area access code. 9
04 Area Code Dial (up to six digits) :
0 ~ 9,
*
, #
Enter the local area code. No Setting
05 Trunk Access Code Dial (up to eight dig-
its) : 0 ~ 9,
*
, #
Enter the trunk access code digits required
to place an outgoing call.
No Setting
Conditions
None
Feature Cross Reference
None
SL2100 ISSUE 2.0
2-8 Program 10 : System Configuration Setup
Program
10