NEC SL2100 - Table 2-12 SMDR FORMAT

Item
No.
Item Input Data Description Default
14 Date 0 = Not Displayed
1 = Displayed
Determine whether or not the date should
be displayed on SMDR reports.
This option must be set to 0 if the trunk
name is set to be displayed in Program
35-02-03.
0
15 CLI/DID Number
Switching
0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name
Determine whether or not the CLI/DID
Number Switching should be displayed.
0
16 T
runk Name or Re-
ceived Dialed Number
0 = Trunk Port Name
1 = Received Dialed
Number
2 = Both
Determine how the SMDR should print in-
coming calls on ANI/DNIS or DID trunks. If
set to (1), ANI/DNIS trunks can print DNIS
digits. If set to (0) trunk names are printed
instead.
0
17 Print Account Code
or Caller Name of In-
coming Call
0 = ACC
1 = CNAME
Determine if SMDR should print Account
Code or Caller Name of Incoming Call.
0
18 Print Mode for Caller
Name of Incoming
Call
0 = Normal
1 = Line Feed
Determine how SMDR should print Caller
Name of Incoming Call.
0
21 S-Point Terminal
Number
0 = MSN Number
1 = Extension Number
0
22 Security Auto Dialing 0 = No Output
1 = Output
Emergency call from Watch Mode. Define
SMDR output on/off. Output is SAD (Se-
curity auto dialing).
1
23 W
atch Auto Dialing 0 = No Output
1 = Output
Emergency call from Remote Inspection.
Define SMDR output on/off. Output is
W
AD (Watch auto dialing )
1
25 Call Waiting 0 = No Output
1 = Output
Define Call Waiting output on/off 1
Table 2-12 SMDR FORMAT
CLSS TIME LAIN DURATION STATION DIALLED No./CLI RD.COST ACCOUNT
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg $hh,hhh iiiiiiii
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg $hh,hhh iiiiiiii
: : : : : : : :
aa bbbb cc:cc dddddddddd ee:ee:ee ffffffffff gggggggggggggggg $hh,hhh iiiiiiii
Conditions
None
Feature Cross Reference
• Station Message Detail Recording
SL2100 ISSUE 2.0
2-382 Program 35 : SMDR Account Code Setup
Program
35