Program 42 : Hotel Setup
42-01 : System Options for Hotel/Motel
Level:
IN
Description
Use Program 42-01 : System Options for Hotel/Motel to assign the system options for Hotel/Motel
Service.
Input Data
Item
No.
Item Input Data Description Default
01 Answering Message
Mode for Wake Up
Call (Hotel Mode)
0 = MOH (Hold T
ime)
1 = VAU Message
2 = VAU Message +
Time
0
02 Wake Up Call Mes-
sage Assignment
0 ~ 100
(0 = No Setting)
VAU Message for Wake Up Calls. You
must make an entry for this program if you
have selected 1 or 2 in Item 01 above.
0
03 Wake Up Call No An-
swer
0 = No Transfer
1 = Transfer to the Oper-
ator
0
04 Setup Message Mode
for Wake Up Call (Ho-
tel Mode)
0 = Confirmation Tone
1 = VAU Message
2 = Time Stamp + VAU
Message
3 = Play Fixed VRS
Message + Time
It sets mode for confirming set up when a
user setting the wakeup call.
When a user selects 0 (Fixed Message)
they should hear “was setting”.
When a user selects “Play Fixed VRS
Message + Time” they should hear the fol-
lowing:
“A wakeup call has been set for [the wake-
up call time in 12 hour format] ”
An example of this is:
“A wakeup call has been set for 8:30 AM”
0
05 Wake Up Call Mes-
sage Assignment
0 ~ 100
(0 = No Setting)
0
06 Flexible Room Status 0 = Off
1 = On
When PRG42-01-06 is set to on, any room
status change from any status can be
made.
Ex)
Hotel Status Code 4 -> 3
Hotel Status Code 4 -> 4
0
07 Snooze Callback Tim-
er
0 ~ 30 (minute)
(0 = Not activated)
After answering to a Wakeup Call, to set
the time that Snooze Callback is activated.
If set to 0, Snooze Callback does not ac-
tivated.
10
08 Snooze Callback Set-
ting Dial
0 ~ 9,
, #
Up to 1 digits
After answering to a Wakeup Call, to set
the dial of Snooze Callback setup.
1
Conditions
None
ISSUE 2.0 SL2100
Programming Manual 2-411
Program
42
To Next Page
Loading...
