NEC SL2100 - Class of Service Options (Hotel;Motel)

Program 42 : Hotel Setup
42-03 : Class of Service Options (Hotel/Motel)
Level:
IN
Description
Use Program 42-03 : Class of Service Options (Hotel/Motel) to set the Hotel/Motel Class of Service
(COS) options. Assign Class of Service to extensions in Program 42-02 : Hotel/Motel Telephone
Setup. There are 15 Classes of Service. Refer to the following chart for a description of each COS
option, its range and default setting. For additional Class of Service options, refer to Programs 20-06.
Input Data
Class of Service Number 1 ~ 15
Item
No.
Item Input Data Description Default
01 Check-In Operation 0 = Off
1 = On
Class 1 ~ 15 = 1
02 Check-Out Operation 0 = Off
1 = On
Class 1 ~ 15 = 1
03 Room Status Output 0 = Off
1 = On
Class 1 ~ 15 = 1
04 DND Setting for Other
Extension
0 = Off
1 = On
Class 1 ~ 15 = 1
05 Wake up Call Setting
for Other Extension
0 = Off
1 = On
Class 1 ~ 15 = 1
06 Room Status Change
for Other Extension
0 = Off
1 = On
Class 1 ~ 15 = 1
07 Restriction Class
Changing for Other
Extension
0 = Off
1 = On
Class 1 ~ 15 = 1
08 Room to Room Call
Restriction
0 = Off
1 = On
Class 1 ~ 15 = 1
09 DND Setting for Own
Extension
0 = Off
1 = On
Class 1 ~ 15 = 1
10 Wake Up Call Setting
for Own Extension
0 = Off
1 = On
Class 1 ~ 15 = 1
11 Change Room Status
for Own Extension
0 = Off
1 = On
Class 1 ~ 15 = 1
12 SLT Room Monitor 0 = Off
1 = On
Enable (1) or disable (0) a single line tele-
phone ability to use Room Monitor.
Class 1 ~ 15 = 1
13 PMS Restriction Level 0 = Of
f
1 = On
Determines the PMS Restriction Level. Class 1 ~ 15 = 1
14 Show guest name on
other hotel phone
0 = Disable
1 = Enable
Enable other guest name indication on
other hotel room terminal.
0
15 Show this guest
name on staff phone
0 = Disable
1 = Enable
Enable guest name indication on staff ter-
minal. (Setting for guest room termianl)
1
SL2100 ISSUE 2.0
2-414 Program 42 : Hotel Setup
Program
42