Item
No.
Item Input Data Description Default
10 Forced Unscreened
Transfer
0 = No (Disabled)
1 = Yes (Enabled)
(Forced UTRF)
Use this option to enable or disable Auto-
mated Attendant Forced Unscreened
Transfer for the Subscriber Mailbox. If ena-
bled, each Screened T
ransfer (TRF) to the
extension is converted to an Unscreened
Transfer (UTRF). If disabled, Screened
Transfers from the Automated Attendant
occur normally.
0
11 Auto Time Stamp 0 = No (Disabled)
1 = Yes (Enabled)
Use this option to enable or disable Auto
Time
Stamp for the Subscriber Mailbox. If ena-
bled, after the subscriber listens to a mes-
sage InMail announces the time and date
the message was left. Auto Time Stamp al-
so announces the message sender (if
known).
A subscriber can also enable Auto Time
Stamp from their mailbox.
0
12 System Administrator 0 = No (Disabled)
1 = Yes (Enabled)
Use this option to designate the Subscrib-
er Mailbox as a System Administrator. This
allows the subscriber to use the SA op-
tions after logging onto their mailbox.
Mailbox 1 = 1
Mailbox 2 ~= 0
13 Dialing Option 0 = No (Disabled)
1 = Yes (Enabled)
Dialing Option provides additional dialing
options for Next Call Routing Mailbox calls
(see Next Call Routing Mailbox below). If
enabled, a caller who accesses the Sub-
scriber Mailbox to leave a message can di-
al any of the options in the Next Call Rout-
ing Mailbox Dial Action Table. If disabled,
the caller can dial only 0 (to use the Next
Call Routing Mailbox 0 action).
0
14 Next Call Routing
Mailbox
Call Routing Mailbox
Number (1 ~ 3 digits, 00
~ 32)
(00 = Undefined)
No entry (Entered by
pressing CLEAR)
(Next CR Mbox)
Use this option to assign a Next Call Rout-
ing Mailbox to the Subscriber Mailbox.
This provides callers with additional dialing
options while listening to a Subscriber
Mailbox recorded or default greeting. The
digits the caller can dial depend on the set-
ting of the Next Call Routing Mailbox and
Alternate Next Call Routing Mailbox op-
tions.
1
15 Directory List Number 0 = None
1 ~ 8 = List Number
= All
0
16 Voice Prompt Lan-
guage
Refer to Ta-
ble 2-13 47-02-16 De-
fault T
able on
page 2-450.
Station Mailbox
Number
1
17 Enable Paging 0 = No (Disabled)
1 = Yes (Enabled)
0
18 Paging Option 0 = RNA
1 = Immediately
0
19 Telephone User Inter-
face Type
0 = Numeric
1 = Mnemonic
0
20 Enable E-mail Notifi-
cation
0 = No
1 = Yes
0
21 E-mail Address Up to 48 characters No Setting
22 Include Message as
Attachment
0 = No
1 = Yes
1
23 All Message Notifica-
tion Enabled
0 = No
1 = Yes
1
ISSUE 2.0 SL2100
Programming Manual 2-449
Program
47
To Next Page
Loading...
