NEC SL2100 - 6.2 Menu Structure When PRG 15-02-60 is set to Advanced Mode 1

Program 10 : System Configuration Setup
10-16 : Option Information Setup
Level:
SA
Description
Use Program 10-16 : Option Information Setup to set up the option given from the DHCP server to
each client.
The items highlighted in gray are read only and cannot be changed.
Input Data
Item
No.
Item Input Data Description Default
01 Router Code number 0 ~ 255 Set the Router IP ad-
dress.
3 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
02 DNS Server Code number 0 ~ 255 Set IP address of DNS
Server.
6 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
03 TFTP Server Name
Code number 0 ~ 255 Set the name for the
TFTP Server.
66 (Fixed)
Maximum 64 character strings No Setting
05 MGC IP Address Code number 0 ~ 255 129 (Fixed)
IP address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
06 Client Host Name Code number 0 ~ 255 Set the Client Host
Name.
12 (Fixed)
Maximum 64 character strings No Setting
07 DNS Domain Name Code number 0 ~ 255 Set the DNS Domain
Name.
15 (Fixed)
Maximum 20 character strings No Setting
08 Download Protocol Code number 0 ~ 255 Set Download Protocol
used for AutoConfig (for
8IPLD-C1 Terminal).
43 (Fixed)
Sub code number 163 (Fixed)
1 = FTP
2 = HTTP
1
09 Encryption Information Code number 0 ~ 255 Set an Encryption Infor-
mation used for Auto-
Config (for 8IPLD-C1
Terminal).
43 (Fixed)
Sub code number 164 (Fixed)
Fixed 128 character strings No Setting
SL2100 ISSUE 2.0
2-24 Program 10 : System Configuration Setup
Program
10