NEC SL2100 - Page 496

Item No. Name Input Data Description
01 Action 0 = UND (Undefined)
1 = TRF (Transfer)
2 = UTRF (Unscreened T
ransfer)
3 = REC1
4 = REC2
5 = LOGON
6 = Hang Up
7 = GOTO
• TRF Action - Screened Transfer (1) (TRF)
• UTRF Action - Unscreened Transfer (2) (UTRF)
• REC1 Action - Quick Message With Greeting (3) (REC1)
• REC2 Action - Quick Message Without Greeting (4)
(REC2)
• LOGON Action - Log Onto Voice Mail (5) (LOGON)
• Hang Up Action (6) (HNGUP)
• GOTO Action - Go to Mailbox (7) (GOTO)
• UND Action - Undefined Routing (0) (UND)
Data Up to 8 digits
(0 ~ 9,
*
, #)
X = Caller Dialed Digits
I = Ignore Digits
N = No Routing
P = Pause
• Digits
Entry : 0 ~ 9, #, and
*
(8 digits max.)
Use Dial Action Table digits to route an Automated Attend-
ant call to a specific location (such as an extension). For
example, to set up a TRF Action to route to extension 305,
for 3 enter TRF for the Action and 305 for the correspond-
ing Number
.
• Caller Dialed Digits
Entry : X(Entered by pressing LK2)
Use the X option to route an Automated Attendant call
based on digits the caller dials. Each X entry represents
one caller dialed digit. For example, to set up a TRF Action
to route to any caller dialed extension in the 301 ~ 399
range, for 3 enter TRF for the Action and XXX for the corre-
sponding Number.
• Ignore Digits
Entry : I(Entered by pressing LK3)
Use the I option to represent any digit dialed by the Auto-
mated Attendant caller that PZ-VM21 InMail ignores for
routing. An example of this is REC action assigned to the
*
key in Dial Action Table 1 by default. The Action is REC2
and the Number is IXXX. This means that a caller can dial
*
+ any mailbox number to leave a Quick Message in that
mailbox. InMail ignores the first digit dialed by the caller
(
*
), and routes according to the next 3 digits dialed.
• No Routing
Entry : N(Entered by pressing LK1)
Use the N option when you want no Automated Attendant
routing to automatically occur. This can be used with the
LOGON action when you want to prompt the caller to enter
a mailbox number
. To do this for the # key (for example),
for the # key enter LOGON for the Action and N for the cor-
responding Number. When the caller dials #, they hear,
Please enter the mailbox number. Or, to exit, press the
pound key.
• Pause
Entry : P(Entered by pressing LK4)
Use the P option when you want the Automated Attendant
to pause while dialing.
Defaults
Dial Action Table Default Settings
Key
Dial Action Table 1 Dial Action Table 2 ~ 32
Action Data Action Data
1 2 (UTRF) XXX 0 (UND) No Setting
2 2 (UTRF) XXX 0 (UND) No Setting
3 2 (UTRF) XXXX 0 (UND) No Setting
4 0 (UND) No Setting 0 (UND) No Setting
5 0 (UND) No Setting 0 (UND) No Setting
6 0 (UND) No Setting 0 (UND) No Setting
7 0 (UND) No Setting 0 (UND) No Setting
SL2100 ISSUE 2.0
2-472 Program 47 : InMail
Program
47