Item
No.
Item Input Data Description Default Related
Program
40 G.726 Jitter Buf-
fer - Minimum
0 ~ 300 ms (for VoIPDB
mode)
10 ~ 300 ms* (for Built-
In VoIP mode)
Set the minimum value of the Jitter
Buffer of G.726 is set. Jitter is the
variation in the time between pack-
ets arriving and the buf
fer allows this
variation to be absorbed.
30
41 G.726 Jitter Buf-
fer - Average
Set the average G.726 Jitter Buffer. 60
42 G.726 Jitter Buf-
fer - Maximum
Set the maximum G.726 Jitter Buf-
fer.
120
49 RTP Filter 0 = Disable
1 = IP
2 = IP + SSRC
1
65 VAD Negotiation
on SDP
0 = Disable
1 = Enable
This PRG is used to determine the
VAD determination method setting
V
AD information on SDP.
This PRG is effective when VAD is
enabled on each codec.
G.711 and G.729 are targets at
this time.
0
66 Voice Band Data
(VBD)
0 = Disable
1 = Enable
This PRG is used for setting VBD to
is "Enable/Disable".
This PRG is necessary to set the 1:
Special in PRG15-03-03 for target
terminal.
0 15-03-03
67 VBD Payload
Type
96 ~ 127 This PRG is specifies the Payload
Type number used by VBD.
97 15-03-03
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-539
Program
84
To Next Page
Loading...
