Program 90 : Maintenance Program
90-04 : Load Data
Level:
SA
Description
This program is available only via telephone programming and not through PC Programming.
Use Program 90-04 : Load Data to load the system data from the inserted SD card to the Flash ROM
in the system.
Input Data
Item
No.
Item Input Data Description Default
01 Load Data 1→Hold - -
02 LCD External File 1→Hold - -
03 License Name File 1→Hold - -
* If only Hold key is pressed, then this copy is canceled.
Conditions
• After uploading the programming, reset the system and wait a few minutes for the system to reset
completely before accessing any line or special system feature. Otherwise, some unusual LED
indications may be experienced.
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-575
Program
90
To Next Page
Loading...
