NEC SL2100 - Page 613

Alarm
No.
Name
Item
No.01
de-
fault
Item
No.02
de-
fault
Content of
alarm
< generation
timing >
Cause Measures Recovery
Alarm
Status
61 SIP exten-
sion trou-
ble infor-
mation
0 0 It failed in the
registration of
the SIP exten-
sion terminal.
The SIP exten-
sion terminal
was not able to
acquire DSP.
•
At Resist to
SL2100 of
the SIP ex-
tension ter-
minal.
• When you
cannot ac-
quire the
DSP re-
source when
it sends it.
<Operate it >
• The registered
port is used by
other extension.
• The license is in-
sufficient.
• DSP of VoIPDB
was not able to
be acquired.
Reconfirm wiring
and the system da-
ta setting. Confirm
whether each
equipment such as
access points
works normally.
ERR
REC
62 DtermIP
trouble in-
formation
0 0 The error oc-
curred by the
DtermIP rela-
tion.
• When the er-
ror occurs
while com-
municating
with VoIPU
or DtermIP.
• When it be-
comes im-
possible to
do the com-
munication
between As-
prie and
DtermIP.
• When failing
in the acquis-
ition of DSP.
<Operate it >
• The packet loss
occurred on the
network or the
wiring cutting oc-
curred.
• DSP of VoIP was
not able to be ac-
quired.
Confirm whether
each equipment
such as wirings
and HUB is normal.
ERR
REC
63 SIP-MLT
trouble in-
formation
0 0 The trouble oc-
curred by the
SIP-MLT rela-
tion.
•
The DSP re-
source was
not able to
be acquired
at incoming/
outgoing.
• The negotia-
tion with
VoIPDB
failed.
<Operate it >
• The packet loss
occurred on the
network or the
wiring cutting oc-
curred.
• DSP of VoIP was
not able to be ac-
quired.
Check network ca-
ble and connec-
tions, as well as
Network switch port
functionality.
WAR
64 VoIPDB
LAN Link
Error
1 0 The link of LAN
of VoIPDB
came of
f.
<Operate it >
• LAN cable cuts
it.
• Connected HUB
broke.
• Defect of CPU.
Check the LAN
Connections and
Wiring.
When the
connection
returns nor-
mally, the
error is re-
covered.
ERR
REC
ISSUE 2.0 SL2100
Programming Manual 2-589
Program
90