Program 90 : Maintenance Program
90-36 : Software Update Time Setting
Level:
IN
Description
Use Program 90-36 : Software Update Time Setting
to define the data for the firmware update
feature. This data is available to set from the PC Programming FW update feature.
The following firmware is available to update with this feature:
• main.bin
• Dspdbu.bin
• dsp.bin
• intradbu.bin is not supported
Input Data
Item
No.
Item Input Data Default Description
01 Automatic Update 0 = Disable
1 = Enable
0 Enable or Disable the Automatic Up-
grade Feature.
04 Day of Week 1 = Monday
2 = Tuesday
3 = W
ednesday
4 = Thursday
5 = Friday
6 = Saturday
7 = Sunday
2 Assign the day of the week that the
Automatic Update should take place.
05 Hour 0 ~ 23 = Hour
(Default = 0)
23 Assign the hour of the day the Auto-
matic Upgrade to run.
06 Minute 0 ~ 59 = Minute
(Default = 0)
0 Assign the minute of the hour for the
Automatic update to run.
08 Manual Update 0 = Disable
1 = Enable
0 Enable or Disable the Manual Update.
09 Month 1 = January
2 = February
3 = March
4 = April
5 = May
6 = June
7 = July
8 = August
9 = September
10 = October
11 = November
12 = December
1 Assign the month for the system re-
boot in case of manual update.
10 Day 1 ~ 31 1 Assign the day of the month for the
system to reboot to update the soft-
ware.
12 Hour 0 ~ 23 0 Assign the hour of the day for the sys-
tem to reboot to update the software.
13 Minute 0 ~ 59 0 Assign the Minute of the Hour for the
system to reboot.
ISSUE 2.0 SL2100
Programming Manual 2-609
Program
90
To Next Page
Loading...
