NEC SL2100 - Page 661

Program No. Program Name
22-02 Incoming Service Type Setup
22-03 Trunk Ring Tone Setup
22-05 IRG Assignment for Normal Ring Trunk
22-08 Second IRG Setup for Unanswered DIL / IRG
31-05 Incoming Ring Tone Audible on External Speaker
81–07 Codec Filter Setup for Analog Trunk Port
Extension Base
Program No. Program Name
15-01 Extension Basic Data Setup (include Virtual Extension)
Copy all data except extension name (item 01).
15-02 Multiline Telephone Basic Data Setup
15-03 Single Line Telephone Basic Data Setup
15-06 Trunk Access Map for Extension
15-07 Programmable Function Key
15-08 Incoming Virtual Extension Ring Tone Setup
15-09 Virtual Extension Ring Assignment
15-10 Incoming Virtual Extension Ring Tone Order Setup
15-11 Virtual Extension Delayed Ring Assignment
15-12 Conversation Recording Destination for Extension
15-17 CO Message Waiting Indication
15-18 Virtual Extension Key Enhancement Options
15-20 LCD Line Key Name Assignment
15-25 DESI-less Page Setup
20-06 Class of Service for Extension
20-29 Timer Class for Extension
21-02 Trunk Group Routing for Extensions
21-04 Toll Restriction Class for Extensions
21-11 Hotline Assignment
23-02 Call Pickup Groups
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
31-02 Internal Paging Group Assignment
82-14 Handset/Headset Gain Setup for Multi-Line Telephone
Department Base
Program No. Program Name
16-01 Department (Extension) Group Basic Data Setup
Copy all data except Group Name (Item 01).
ISSUE 2.0 SL2100
Programming Manual 2-637
Program
92