NEC SL2100 - Delete Command

Program 92 : Copy Program
92-07 : Delete Command
Level:
IN
Description
This program is available only via telephone programming and not through PC Programming.
Use Program 92-07 : Delete Command to delete the data of each extension number of each
extension group or each table.
Input Data
Program Number XX-XX
Item No. Item Input Data
01 Destination Number (From) Each extension port = 1 ~ 128
Each virtual extension port = 1 ~ 50 (Program 11-04)
Each extension group = 1~50 (Program 1
1-07)
Each ACD Group = 1 ~ 8
Destination Number (To)
The following table lists Programs that use the Delete Command function.
Program Number Program Name
11-02 Extension Numbering
11-04 Virtual Extension Numbering
11-06 ACI Extension Numbering
11-07 Extension (Department) Group Pilot Number
11-08 ACI Group Pilot Number
11-17 ACD Group Pilot Number
Conditions
None
Feature Cross Reference
None
ISSUE 2.0 SL2100
Programming Manual 2-645
Program
92