Program 10 : System Configuration Setup
10-76 : Push Notification Service Basic Setup
Level:
IN
(This Program is available for V2.00 or higher)
Description
Use Program 10-76: Push Notification Service Basic Setup to enable Push Proxy Server access
for PUSH Notification to the VoIP Application.
In Program 24-02-15 change the initial value to 8 sec when using the Push Notification service.
Input Data
Item
No.
Item Input Data Description Default
01 Domain Name Maximum 128 charac-
ters
Set Domain Name of Push Proxy Server. Refer below
02 Access Key Read Only Refer below
03 Server Certificate Maximum 32 characters Enter Server Certificate file name.
In SL2100 Ver 2.00, this program is on-
ly enter the Server Certificate file name
"AmazonRootC1.pem" which is inclu-
ded in the system.
-
04 HTTPS proxy server
address
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
Set HTTPS Proxy Server IP Address. 0.0.0.0
05 HTTPS proxy server
port
1 ~ 65535 Set HTTPS Proxy Server port number. 8080
Table 2-1 Default
Item No. Default
01 usa01.nec-pushproxy.com
02 A2Hi123s>Y=RBx4u5DIt7wO9?70M<2@JMsCD8QErFX:N96GyDBLsK6NsJZ;P2V63
Conditions
None
Feature Cross Reference
• IP Single Line Telephone (SIP) - PUSH Notification
ISSUE 2.0 SL2100
Programming Manual 2-63
Program
10
To Next Page
Loading...
