NEC SL2100 - Change Your PC IP Address

Configure the SL2100
Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1 22
Change your PC IP Address
You will need to reconfigure your PC to have an IP address in the same subnet as the SL2100 during system
commissioning. You will be able to change the IP address of the SL2100 during this process.
Your IP Address is adjusted in Windows Control Panel, select ‘View network status and tasks’
Edit the properties of your Ethernet adaptor
You will need to define an IP address in the same network as the SL2100. Recommended values are
172.16.0.100 / 255.255.0.0
Gateway and DNS addresses are not necessary. Once commissioning of the SL2100 is completed you can
return to this area and reconfigure your network adaptor to the previous values.