NEC SL2100 - 4.2 Placing Calls Quickly

Configure the SL2100
Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1 26
Select the Service Code Range
 Leave at country default
 Original range 7xx, 8xx
 Add a Star *7xx, *8xx (use this range if you want extension numbers beginning 7xx or 8xx)
Select the Trunk Access code
 Leave at country default
 Trunk access code = 0
 Trunk access code = 9
Select the Programmable Function Key Assignmant for all system phones
 Select from 1 to 12 lines (these are trunks connected to the SL2100)
 Delete all keys (you can setup your own key assignment later with PCPro)
 Select Park Hold keys 1~4