Dial Out
• Lift handset or press Speaker key
• Choose Line or Dial 9 (system will automatically choose an available line for you)
Note: To Mute yourself, press the Mute key, key will be lit Red when muted
Transfer a Call
• With an active call, Press HOLD key (or press preprogrammed DSS button-Skip next
step)
• Dial extension number or 9 + phone number, announce call (optional) and
• Announce call (optional) and Hang up
• Or press Transfer call will transfer unannounced
Note: Press 8 after the extension to transfer call directly to voicemail
Intercom Calls
• Lift handset or press Speaker key
• Dial extension number (if employee is on the other line you will get a busy and ring
tone together)
Note: Press 8 after the extension to leave a message in emoployee’s voicemail
Conference call
1. Make or receive first call (internal or external), when the call is connected,
2. Press the Conf soft key (on display)
3. MAKE or receive second call (internal or external)
4. Press Add soft key, continue to follow steps 3 & 4 to add more callers OR
5. Press Begin soft key (on display) to join all calls
To Next Page
Loading...
