NEC Storage Manager Messages - Page 6

Chapter 1 Messages and Output Destinations
1
Chapter 1 Messages and Output Destinations
The NEC Storage Manager outputs the information, which is required for maintenance and operation of the NEC
Storage Manager and the disk arrays, to log files of the console/terminal and the management server. The log files to
which a message is output are syslog, event log, and operation log. The message describes information that indicates
events to be reported to an administrator, such as system state transition, fault and error detection, and command input
results.
The NEC Storage ReplicationControl outputs the operation information of data replication in a message format, to the
log files of the console/terminal and the business server. The message is output to syslog, event log, and operation log.
The message describes the information for checking operating conditions, such as command execution results, and fault
and error detection information, etc.
Figure 1-1 shows an overview of message output.
Business
server
Management server
NEC Storage Manager
Console/Terminal
NEC Storage
disk array
Output to syslog (UNIX) or event log
(Windows)
Output to console/terminal
Syslog or
event log
Operation log
Output to syslog (UNIX) or even
t
log (Windows)
Output to console/terminal
NEC Storage
ReplicationControl
Syslog or
event log
Operation log
Figure 1-1 Overview of Message Output