1.
A camp-on indication tone is sent to the busy station, and
the user can use a switchhook flash to answer the second
call.
CB (Call Back)
Provides the ability for a calling station to set a CALL
BACK. The calling station will be rung as soon as the
busy station becomes available.
SIG (Manual Signaling)
Permits station users to send a one-second ring to a
predetermined station. If the signaled station is ringing
from another call, the manual intercom signal will
interrupt that ringing.
CKEEP (Eight-Party Conference Retrain)
Allows all outside parties to stay on a conference when
all internal parties hang up.
SCALL (Serial Call)
Allows the user to set Serial Call for the caller before
extending the call, allowing the caller to receive an
announcement at the end of the call guiding the caller
to dial the next number and subsequent numbers.
IZP (Internal Zone Paging)
Allows a user to make a voice call through the speakers
of the designated group.
IDCHG (Call ID Change Display)
Allows the user to toggle between standard display and
an alternate display.
GPICK (Call Pickup - Group Enhancement)
Allows the user to answer any ringing station within the
user's expanded call pickup group.
CHCNF (Call Hold - Conference)
Allows a station user to establish a conference
connection by adding a third party, who is held on
another line, to the existing two-party connection.
VISIT (Survivable Remote MGC)
Allows a station to indicate a status: when a user is in
remote office, VISIT will be blinking. After recovering
the main office, VISIT will return to light.
RMUTE (Ringer Mute)
Allows a station user to mute or recover station ringing.
>>> (Display Function Next Page)
Allows the user to scroll to the next screen.
<<< (Display Function Previous Page)
Allows the user to scroll to the previous screen.
To Next Page
Loading...
