NEC Univerge SV8100 - Page 430

Issue 1.0 UNIVERGE SV8100
2 - 406 Direct Inward System Access (DISA)
Operation
To place a DISA call into the system (from any 2500 type telephone):
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial an extension.
- OR -
Dial 0 for Trunk Group Routing or ARS.
- OR -
Dial Alternate Trunk Route Access Code (if enabled).
- OR -
Dial 704 + a trunk group number (1~100) for an outside call.
- OR -
Dial #0 + a trunk number (1~200) for an outside call.
- OR -
Dial #2 + System Speed Dialing bin number.
- OR -
Dial 9 for the operator.
- OR -
Dial 701 + an Internal Paging Zone number (0, 1~9, 00, 01~64).
- OR -
Dial 703 + an External Paging Zone number (1~8 or 0 for All Call).
- OR -
Dial 710 + a busy extension number to barge in to a call.
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
This timer determines how long the
system waits before disconnecting a
DISA call after the Long
Conversation tone is heard. This
program has no affect if Program
25-07-07 is set to 0.
 This applies to automatically
transferred Tandem Trunk and
DISA calls.
0~64800 (seconds)
(default = 30 seconds)
3
Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3